Eminent Editorial Board Members

Andre Lee
Journal of Materials Science and Metallurgy
Shridhar N Mathad
Journal of Materials Science and Metallurgy
Anthony N. Papathanassiou
Journal of Materials Science and Metallurgy
Kaveh Edalati
Journal of Materials Science and Metallurgy
Journal of Materials Science and Metallurgy
Jinping Suo
Journal of Materials Science and Metallurgy
Yap Pow Seng
Journal of Materials Science and Metallurgy
Andy Choi
Journal of Materials Science and Metallurgy
Francisco Torrens
Journal of Materials Science and Metallurgy

Journal of Materials Science and Metallurgy (JMSM) is a multidisciplinary journal which is devoted to publishing high-quality experimental research, technical evaluations, and reviews within the various fields of Material Science. JMSM encourages submissions in aspects of the science and engineering of advanced materials, composition, processing, structure, property, and performance of functional materials.

JMSM aims to provide a high profile, leading edge forum for academic researchers, industrial professionals, engineers, educators and policymakers working in the field of Materials Science.

Mechanical Properties of Al6061- Al2O3 Metal Matrix Composite Using Die Casting Technique
6061Al - Al2O3 Metal matrix composites are applied as conventional materials in the domain of aerospace, automotive and marine applications to enhance the physical properties. The present work aimed to prepare metal matrix composite using 6061Al as t...
Diffuse Reflectance Spectra for Sulvanites Cu3TaVI4 (VI: S, Se and Te)
Polycrystalline samples of Cu3TaVI4 (VI: S, Se and Te) were prepared by the melt and anneal method. X-Ray Diffraction (XRD) and Diffuse Reflectance Spectroscopy (DRS) measurements were performed in order to verify the crystal structure and calculate ...
Analysis of the Performance of A BAW Resonator According to its Design Parameters
We present in this paper a brief review on the use of acoustic waves in designing MEMS based resonator. Acoustic devices are classified into two basic types – Surface acoustic wave (SAW) and Bulk acoustic wave (BAW) devices. A BAW resonator is mode...
Study on Microstructure and Mechanical Behavior of Spray Deposited and Hot Pressed Hypereutectic Al–Si Alloy
This paper reports the findings of the microstructural and tensile properties of spray deposited and hot pressed Al–Si alloys and compared with conventionally cast alloys of the same composition. In this present investigation, binary hypereutectic ...
W251 B6+ Gas Turbine Engine Transition Piece Static Seal Material Upgrade
Four different types of base materials (NIT50, NIT60, SS304, and SS316) were proposed as a replacement for the originally installed gas turbine transition piece static seal. Samples from each of the proposed material, as well as the original static s...
Physical and Mechanical Properties of Porcelain Tiles Manufactured Using Nrobo- Uzo Uwani Nigerian Clay and local Raw Materials
Nigeria is endowed with vast natural resources for porcelain tiles manufacturing, yet it imports about 80% of this product from other countries....
Criteria for Abradable Coatings to Enhance the Performance of Gas Turbine Engines
The performance requirements of an advanced jet engine can only be achieved by reducing parasitic air flow over the tip of a rotating blade. These over tip losses can be reduced appreciably by applying abradable coatings/seals....
Effect of Carbon Black Loading on Linear Low-Density Polyethylene Properties
This article studied the mechanical, thermal, electrical, rheology, and morphological properties of low-density polyethylene mixed with carbon black (CB) content of 5%, 10%, and 20% by weight. The optimum mechanical and electrical properties performa...
Microstructure and Mechanical Properties of LENS Manufactured NiTi Shape Memory Alloy After Ageing and During In-Situ SEM Tensile Test
The Laser Engineered Net Shaping additive manufacturing method was used to prepare NiTi samples. In the process spherical gas atomized powder with particle size in the range of 45 – 115 μm containing 50.08 at.% Ni was used. DSC studies showed addi...
The Equation of State of Liquid and Solid Materials Part V: Relation with Electrical Resistivity
The aim of this paper is to show that the electrical resistivity of most crystalline and molten pure materials (called normal by Bridgman) verifies the modified Van Der Waals equation of state...